Concrete Cube Mould

Approx. Rs 880 / PieceGet Latest Price

Product BrochureProduct Details:

Approx. Rs 1,900 / PieceGet Latest Price

Product BrochureProduct Details:

The molds will be of metal and will be sufficient to prevent deformation. They shall be constructed in such a manner as to allow the removal of molded specimens without damage and shall be designed in such a way that, when they are ready for use, the dimensions and inner faces shall be accurate within the prescribed limits. Will be The internal faces of the mold will be smooth.

Mold plates and the inside face of the base plate may contain blowflies and blemishes on the surface, such as honey-combing. All such blowholes and cavities shall be fitted with mild steel pins or by wehling and shall be finished flush with the surface either by machining or by filing.

However, the number of blowholes allowed on each plate can be greater than 50 and in the case of cubic molds of sizes 150 mm and 10, 150 mm and 10 are included, cylindrical molds of 150 mm diameter to 300 mm height and beam sizes. 100 x 100 x 500 mm and 150 x 150 x 700 mm.

The size of the blockhole in any direction cannot exceed 5 mm with a depth of 3 to 5 mm. In the case of cylindrical molds, the size of the blowhole / cavity cannot exceed 20–25 mm in any direction

Approx. Rs 450 / PieceGet Latest Price

Product BrochureProduct Details:

The 50 mm cube specimens are produced for compression test. The dimension is compatible with ASTM C109. Made from steel

Approx. Rs 550 / PieceGet Latest Price

Product BrochureProduct Details:

The molds will be of metal and will be sufficient to prevent deformation. They shall be constructed in such a manner as to allow the removal of molded specimens without damage and shall be designed in such a way that, when they are ready for use, the dimensions and inner faces shall be accurate within the prescribed limits. Will be The internal faces of the mold will be smooth.
Mold plates and the inside face of the base plate may contain blowflies and blemishes on the surface, such as honey-combing. All such blowholes and cavities shall be fitted with mild steel pins or by wehling and shall be finished flush with the surface either by machining or by filing.
However, the number of blowholes allowed on each plate can be greater than 50 and in the case of cubic molds of sizes 150 mm and 10, 150 mm and 10 are included, cylindrical molds of 150 mm diameter to 300 mm height and beam sizes. 100 x 100 x 500 mm and 150 x 150 x 700 mm.
The size of the blockhole in any direction cannot exceed 5 mm with a depth of 3 to 5 mm. In the case of cylindrical molds, the size of the blowhole / cavity cannot exceed 20–25 mm in any direction

Approx. Rs 700 / PieceGet Latest Price

Product Details:

The molds will be of metal and will be sufficient to prevent deformation. They shall be constructed in such a manner as to allow the removal of molded specimens without damage and shall be designed in such a way that, when they are ready for use, the dimensions and inner faces shall be accurate within the prescribed limits. Will be The internal faces of the mold will be smooth.

Mold plates and the inside face of the base plate may contain blowflies and blemishes on the surface, such as honey-combing. All such blowholes and cavities shall be fitted with mild steel pins or by wehling and shall be finished flush with the surface either by machining or by filing.

However, the number of blowholes allowed on each plate can be greater than 50 and in the case of cubic molds of sizes 150 mm and 10, 150 mm and 10 are included, cylindrical molds of 150 mm diameter to 300 mm height and beam sizes. 100 x 100 x 500 mm and 150 x 150 x 700 mm.

The size of the blockhole in any direction cannot exceed 5 mm with a depth of 3 to 5 mm. In the case of cylindrical molds, the size of the blowhole / cavity cannot exceed 20–25 mm in any direction