Cement Concrete Testing Equipment

Approx. Rs 4,500 / PieceGet Latest Price

Approx. Rs 1,550 / PieceGet Latest Price

Approx. Rs 640 / PieceGet Latest Price

Additional Information:

Approx. Rs 7,800 / PieceGet Latest Price

• Standard impact energy:2.207 J.
• Pointer length: 20.0 ± 0. 2mm.
• Friction of pointer: 0.65 ± 0. 15N.
• Spherical radius of bouncing rod: 25±1.0mm.
• Elastic tension spr.

Approx. Rs 4,900 / PieceGet Latest Price

The Marsh cone test is a workability test used for specification and quality control of cement pastes and grouts.

Approx. Rs 29,000 / PieceGet Latest Price

Approx. Rs 10,000 / NumberGet Latest Price

Approx. Rs 32,000 / PieceGet Latest Price

Capacity 100 tonnes. Pressure gauge for accurate testing of concrete cubes & cylinders. Suitable for testing concrete cubes of size 15 cm x 15 cm x 15cm & concrete cylinders of size 15 cm dia x 30 cm height. A hydraulic gauge that is marked in KN division and is fitted with a maximum red pointer.

Additional Information:

Approx. Rs 56,000 / UnitGet Latest Price

Approx. Rs 3,200 / PieceGet Latest Price

TO DETERMINE THE FINENESS OF CEMENT

This apparatus is used to determine the fineness of Portland cement in terms of the specific surface expressed as total surface area in square centimeters per gram of cement.
The apparatus is supplied with glass U-tube manometer with valve, steel stand, test cell with disk and plunger all in stainless steel, rubber aspirator bulb, 1000 filter paper disks, manometric liquid, vaseline grease for better coupling tube/cell, funnel, brush.

Dimensions: 220x180x470 mm
Weight:12 Kg approx.

Approx. Rs 999 / PieceGet Latest Price

Additional Information:

Approx. Rs 4,200 / PieceGet Latest Price

Approx. Rs 3,000 / PieceGet Latest Price

VICAT Needle Apparatus
ZI 1003
IS 4031, 2645, 2542 ( PART-1), 1727, 5513 & 712
BS 12, 146, 915, 1370, 4027, 4246, 4248
AASHTO T 129, E 131.

This instrument is used for determining the normal consistency and setting times of cement and ''''''''''''''''A'''''''''''''''' class limes.

Specification:
The apparatus consists of a metallic frame bearing a freely movable and with a cap at top, one vicat mould and glass base plate and one set of needles one each initial needle, final needle and consistency plunger.

Vicat Needle Apparatus : ZI 1003
Vicat Needle Apparatus
IS 4031, 2645, 2542 ( PART-1), 1727, 5513 & 712. BS 12, 146, 915, 1370, 4027, 4246, 4248, AASHTO T 129, E 131.
This instrument is used for determining the normal consistency and setting times of cement and ''''''''''''''''A'''''''''''''''' class limes.
SPECIFICATION:
The apparatus consists of a metallic frame bearing a freely movable and with a cap at top, one vicat mould and glass base
plate and one set of needles one each initial needle, final needle and consistency plunger.
VICAT NEEDLE APPARATUS WITH DASHPOT
IS 4031, 2645, 2542 (PART-1), 1727, 5513, 5513 & 712. BS 12, 146, 915, 1370, 4027, 4246, 4248, AASHTO T 129, E 131
SPECIFICATION :
Same as ZI 1003 but in addition is fitted with a dashpot which facilities gentle lowering of the needles.
ACCESSORIES :
Mild steel base plate 5 inches x 5 inches. Fulcrum mould, brass, 70mm i.d. base dia x 60mm i.d. top dia, 40 mm height.
NOTE : 1) Normally set of needles and mould which meet is requirements as per I.S. 5513 are supplied. While ordering
please specify the specification code of the instrument required.
2) Vicat needle apparatus for determining consistency of hydraulic cement. Gypsum plaster, lime etc. As per ASTM C 187-
58 C 472-62 C 110-58, IS 2542 (Part-1) can also be supplied.

Approx. Rs 72,000 / PieceGet Latest Price

Approx. Rs 950 / PieceGet Latest Price

Approx. Rs 7,600 / PieceGet Latest Price

Approx. Rs 44,000 / PieceGet Latest Price

Approx. Rs 8,000 / PieceGet Latest Price

These straight edges are excellent for measuring the lateral regularity of a road or floor and can be used with aluminium wedge blocks, which allow the user to determine how accurate the work is on the vertical plain as well.At approximately three metres in length, these tools are lightweight, making them easy to transport from job to job.The wedge blocks - which are supplied separately - are fitted to either end of the product, which supports the item as well as providing a set height between the surface and the beam.It is easy to check for irregularities with this item, as it provides the operator with a visual indicator of the evenness of any slab.Optional 2.5 mm incremented wedges are available, which offer a range of 12.5 mm low to 12.5 mm high.

Approx. Rs 8,000 / PieceGet Latest Price

Approx. Rs 20,000 / PieceGet Latest Price

BS 1881-103, 5075

 The UTC-0580 Compacting Factor Apparatus is used to determine the compaction factor of concrete with low, medium and high workability.

Comprising two conical hoppers having a hinged trap door attached to the lower end of each hopper, allowing the concrete sample to flow freely into the cylindrical mould.

The hoppers and the mould are mounted onto a rigid steel frame and are easily removable for cleaning.

Additional Information:

Approx. Rs 8,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 4,400 / SetGet Latest Price

Cylindrical Metal Measures with ISi Certification Mark, IS:2386 (Part 3)

Consists of one each of the following measures:

Measure 3 litres

 Measure 15 litres

Measure 30 litres Supplied Complete with Tamping Rod of 16mm dia x 60 cm long having ISI Certification Mark IS: 10086